Solution: If you have SATA drives, use AHCI. ATA runs the SATA controller in compatibility mode and loses the native features. The only OS you'll probably. This file provides the SATA AHCI driver for Intel 3420-based 11G PowerEdge systems running supported Microsoft Windows OS. What Is the Difference Between AHCI and SATA in Dell Precision BIOS? RAID mode can run on Windows XP and Windows 2000 if the proper drivers are loaded at setup. A Closer Look at AHCI vs. According to information on the Intel’s site about the Rapid Storage Technology driver. Are Intel Chipset SATA RAID Controller.

Origin Software For Fifa 13. For those who don’t care for the learning adventure, just This evening, I was bemused to find a Linux live disk unable to identify the storage volume on my new Dell XPS 13 laptop. A quick search introduced me to a problem I have not encountered before; the SSD was likely configured to use a SATA controller mode that did not have a driver in the kernel of the live disk installer. This is typically when the stock disk has been shipped in either IDE (for backwards compatibility purposes) or a vendor specific RAID mode, instead of the native Advanced Host Controller Interface ( AHCI) that exposes some of SATAs more advanced features.

Trusted And High Paid Ptr Programs. One can easily change this setting in the BIOS. On my XPS I had to navigate to System Configuration >SATA Configuration and switch the radio button selection from RAID On to AHCI. A rather scary warning informed me that this would more than likely break my existing partitions. As a curious scientist with a recovery partition as a safety net, I decided to proceed anyway.

Unsurprisingly, Windows 10 failed to boot, electing to display the dreaded sideways smiley face and a suggestion that I read up about the INACCESSIBLE_BOOT_DEVICE error. It turns out, to optimize boot times, Windows disables drivers that are deemed unnecessary for startup during installation. Herein lies the problem, if the OS is installed while the disk is in one of these other modes (in my case RAID), the driver that would allow us to speak AHCI to our speaking AHCI-speaking SATA storage controller is effectively disabled (even though it is installed). Windows, without the ability to communicate with the disk correctly, has no real option but to fall on its side with a glum expression and throw the INACCESSIBLE_BOOT_DEVICE error during startup. The accusations are corroborated by the: Some operating systems, notably Windows Vista, Windows 7, Windows 8 and Windows 10 do not configure themselves to load the AHCI driver upon boot if the SATA-drive controller was not in AHCI mode at the time of installation.